通風式滅菌器主要適用于各種耐高溫軟包裝制品（含PVC、非PVC包裝的液體）、塑料安瓿、無菌濕巾、無菌面膜、預灌封針劑、PP軟管裝膏劑、鋁塑管裝膏劑等產品的滅菌處理。該設備采用壓力蒸汽和空氣混壓滅菌工藝模式，由強制對流風扇和導流風板結構使得腔體內部非飽和蒸汽均勻混合，確保滅菌溫度均勻性。
設備內部設有冷卻盤管，產品的冷卻和干燥是通過將冷卻水引入冷凝盤管將滅菌室內的混合氣體冷凝。冷空氣流過產品將產品冷卻，同時產品表面的水漬蒸發，最后實現冷卻和干燥的目的。在冷卻過程中對產品實施壓力跟蹤和反壓保護，以保證產品不會由于高溫狀態下內外反向壓差或過大壓差造成產品損壞。同時具有人工干預措施在自控失調狀態下保證產品安全。
Ventilation sterilizer is mainly applicable to the sterilization treatment of various high temperature resistant soft packaging products (including PVC, non-PVC packaging liquid), plastic ampoules, sterile wipes, sterile mask, pre-filled injection, PP hose plaster, aluminum-plastic tube plaster and other products.The equipment adopts pressure steam and air mixed pressure sterilization process mode. The structure of forced convection fan and diversion fan makes the unsaturated steam inside the cavity mix evenly to ensure the uniformity of sterilization temperature.
The equipment is internally equipped with a cooling coil, and the cooling and drying of the product is to condensate the mixed gas in the sterilization room by introducing cooling ** into the condensation coil.Cold air flows through the product to cool the product, evaporate the ** on the product surface, and finally achieve the purpose of cooling and drying.During the cooling process, pressure tracking and back pressure protection are implemented to ensure that the product will not be damaged due to reverse pressure difference or excessive pressure difference between inside and outside at high temperature.At the same time, there are manual interventions to ensure product safety under the condition of self-control disorder.
智藥研習社官方微信
制藥在線官方微信
2006-2025 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
